Age Owner Branch data TLA Line data Source code
1 : : /*-------------------------------------------------------------------------
2 : : *
3 : : * nodes.h
4 : : * Definitions for tagged nodes.
5 : : *
6 : : *
7 : : * Portions Copyright (c) 1996-2025, PostgreSQL Global Development Group
8 : : * Portions Copyright (c) 1994, Regents of the University of California
9 : : *
10 : : * src/include/nodes/nodes.h
11 : : *
12 : : *-------------------------------------------------------------------------
13 : : */
14 : : #ifndef NODES_H
15 : : #define NODES_H
16 : :
17 : : /*
18 : : * The first field of every node is NodeTag. Each node created (with makeNode)
19 : : * will have one of the following tags as the value of its first field.
20 : : *
21 : : * Note that inserting or deleting node types changes the numbers of other
22 : : * node types later in the list. This is no problem during development, since
23 : : * the node numbers are never stored on disk. But don't do it in a released
24 : : * branch, because that would represent an ABI break for extensions.
25 : : */
26 : : typedef enum NodeTag
27 : : {
28 : : T_Invalid = 0,
29 : :
30 : : #include "nodes/nodetags.h"
31 : : } NodeTag;
32 : :
33 : : /*
34 : : * pg_node_attr() - Used in node definitions to set extra information for
35 : : * gen_node_support.pl
36 : : *
37 : : * Attributes can be attached to a node as a whole (place the attribute
38 : : * specification on the first line after the struct's opening brace)
39 : : * or to a specific field (place it at the end of that field's line). The
40 : : * argument is a comma-separated list of attributes. Unrecognized attributes
41 : : * cause an error.
42 : : *
43 : : * Valid node attributes:
44 : : *
45 : : * - abstract: Abstract types are types that cannot be instantiated but that
46 : : * can be supertypes of other types. We track their fields, so that
47 : : * subtypes can use them, but we don't emit a node tag, so you can't
48 : : * instantiate them.
49 : : *
50 : : * - custom_copy_equal: Has custom implementations in copyfuncs.c and
51 : : * equalfuncs.c.
52 : : *
53 : : * - custom_read_write: Has custom implementations in outfuncs.c and
54 : : * readfuncs.c.
55 : : *
56 : : * - custom_query_jumble: Has custom implementation in queryjumblefuncs.c.
57 : : * Also available as a node field attribute.
58 : : *
59 : : * - no_copy: Does not support copyObject() at all.
60 : : *
61 : : * - no_equal: Does not support equal() at all.
62 : : *
63 : : * - no_copy_equal: Shorthand for both no_copy and no_equal.
64 : : *
65 : : * - no_query_jumble: Does not support JumbleQuery() at all.
66 : : *
67 : : * - no_read: Does not support nodeRead() at all.
68 : : *
69 : : * - nodetag_only: Does not support copyObject(), equal(), jumbleQuery()
70 : : * outNode() or nodeRead().
71 : : *
72 : : * - special_read_write: Has special treatment in outNode() and nodeRead().
73 : : *
74 : : * - nodetag_number(VALUE): assign the specified nodetag number instead of
75 : : * an auto-generated number. Typically this would only be used in stable
76 : : * branches, to give a newly-added node type a number without breaking ABI
77 : : * by changing the numbers of existing node types.
78 : : *
79 : : * Node types can be supertypes of other types whether or not they are marked
80 : : * abstract: if a node struct appears as the first field of another struct
81 : : * type, then it is the supertype of that type. The no_copy, no_equal,
82 : : * no_query_jumble and no_read node attributes are automatically inherited
83 : : * from the supertype. (Notice that nodetag_only does not inherit, so it's
84 : : * not quite equivalent to a combination of other attributes.)
85 : : *
86 : : * Valid node field attributes:
87 : : *
88 : : * - array_size(OTHERFIELD): This field is a dynamically allocated array with
89 : : * size indicated by the mentioned other field. The other field is either a
90 : : * scalar or a list, in which case the length of the list is used.
91 : : *
92 : : * - copy_as(VALUE): In copyObject(), replace the field's value with VALUE.
93 : : *
94 : : * - copy_as_scalar: In copyObject(), copy the field as a scalar value
95 : : * (e.g. a pointer) even if it is a node-type pointer.
96 : : *
97 : : * - equal_as_scalar: In equal(), compare the field as a scalar value
98 : : * even if it is a node-type pointer.
99 : : *
100 : : * - equal_ignore: Ignore the field for equality.
101 : : *
102 : : * - equal_ignore_if_zero: Ignore the field for equality if it is zero.
103 : : * (Otherwise, compare normally.)
104 : : *
105 : : * - custom_query_jumble: Has custom implementation in queryjumblefuncs.c
106 : : * for the field of a node. Also available as a node attribute.
107 : : *
108 : : * - query_jumble_ignore: Ignore the field for the query jumbling. Note
109 : : * that typmod and collation information are usually irrelevant for the
110 : : * query jumbling.
111 : : *
112 : : * - query_jumble_squash: Squash multiple values during query jumbling.
113 : : *
114 : : * - query_jumble_location: Mark the field as a location to track. This is
115 : : * only allowed for integer fields that include "location" in their name.
116 : : *
117 : : * - read_as(VALUE): In nodeRead(), replace the field's value with VALUE.
118 : : *
119 : : * - read_write_ignore: Ignore the field for read/write. This is only allowed
120 : : * if the node type is marked no_read or read_as() is also specified.
121 : : *
122 : : * - write_only_relids, write_only_nondefault_pathtarget, write_only_req_outer:
123 : : * Special handling for Path struct; see there.
124 : : *
125 : : */
126 : : #define pg_node_attr(...)
127 : :
128 : : /*
129 : : * The first field of a node of any type is guaranteed to be the NodeTag.
130 : : * Hence the type of any node can be gotten by casting it to Node. Declaring
131 : : * a variable to be of Node * (instead of void *) can also facilitate
132 : : * debugging.
133 : : */
134 : : typedef struct Node
135 : : {
136 : : NodeTag type;
137 : : } Node;
138 : :
139 : : #define nodeTag(nodeptr) (((const Node*)(nodeptr))->type)
140 : :
141 : : /*
142 : : * newNode -
143 : : * create a new node of the specified size and tag the node with the
144 : : * specified tag.
145 : : *
146 : : * !WARNING!: Avoid using newNode directly. You should be using the
147 : : * macro makeNode. eg. to create a Query node, use makeNode(Query)
148 : : */
149 : : static inline Node *
627 heikki.linnakangas@i 150 :CBC 60260488 : newNode(size_t size, NodeTag tag)
151 : : {
152 : : Node *result;
153 : :
154 [ - + ]: 60260488 : Assert(size >= sizeof(Node)); /* need the tag, at least */
155 : 60260488 : result = (Node *) palloc0(size);
156 : 60260488 : result->type = tag;
157 : :
158 : 60260488 : return result;
159 : : }
160 : :
161 : : #define makeNode(_type_) ((_type_ *) newNode(sizeof(_type_),T_##_type_))
162 : : #define NodeSetTag(nodeptr,t) (((Node*)(nodeptr))->type = (t))
163 : :
164 : : #define IsA(nodeptr,_type_) (nodeTag(nodeptr) == T_##_type_)
165 : :
166 : : /*
167 : : * castNode(type, ptr) casts ptr to "type *", and if assertions are enabled,
168 : : * verifies that the node has the appropriate type (using its nodeTag()).
169 : : *
170 : : * Use an inline function when assertions are enabled, to avoid multiple
171 : : * evaluations of the ptr argument (which could e.g. be a function call).
172 : : */
173 : : #ifdef USE_ASSERT_CHECKING
174 : : static inline Node *
3144 tgl@sss.pgh.pa.us 175 : 209310103 : castNodeImpl(NodeTag type, void *ptr)
176 : : {
3145 andres@anarazel.de 177 [ + + - + ]: 209310103 : Assert(ptr == NULL || nodeTag(ptr) == type);
3144 tgl@sss.pgh.pa.us 178 : 209310103 : return (Node *) ptr;
179 : : }
180 : : #define castNode(_type_, nodeptr) ((_type_ *) castNodeImpl(T_##_type_, nodeptr))
181 : : #else
182 : : #define castNode(_type_, nodeptr) ((_type_ *) (nodeptr))
183 : : #endif /* USE_ASSERT_CHECKING */
184 : :
185 : :
186 : : /* ----------------------------------------------------------------
187 : : * extern declarations follow
188 : : * ----------------------------------------------------------------
189 : : */
190 : :
191 : : #ifndef FRONTEND
192 : :
193 : : /*
194 : : * nodes/{outfuncs.c,print.c}
195 : : */
196 : : struct Bitmapset; /* not to include bitmapset.h here */
197 : : struct StringInfoData; /* not to include stringinfo.h here */
198 : :
199 : : extern void outNode(struct StringInfoData *str, const void *obj);
200 : : extern void outToken(struct StringInfoData *str, const char *s);
201 : : extern void outBitmapset(struct StringInfoData *str,
202 : : const struct Bitmapset *bms);
203 : : extern void outDatum(struct StringInfoData *str, Datum value,
204 : : int typlen, bool typbyval);
205 : : extern char *nodeToString(const void *obj);
206 : : extern char *nodeToStringWithLocations(const void *obj);
207 : : extern char *bmsToString(const struct Bitmapset *bms);
208 : :
209 : : /*
210 : : * nodes/{readfuncs.c,read.c}
211 : : */
212 : : extern void *stringToNode(const char *str);
213 : : #ifdef DEBUG_NODE_TESTS_ENABLED
214 : : extern void *stringToNodeWithLocations(const char *str);
215 : : #endif
216 : : extern struct Bitmapset *readBitmapset(void);
217 : : extern Datum readDatum(bool typbyval);
218 : : extern bool *readBoolCols(int numCols);
219 : : extern int *readIntCols(int numCols);
220 : : extern Oid *readOidCols(int numCols);
221 : : extern int16 *readAttrNumberCols(int numCols);
222 : :
223 : : /*
224 : : * nodes/copyfuncs.c
225 : : */
226 : : extern void *copyObjectImpl(const void *from);
227 : :
228 : : /* cast result back to argument type, if supported by compiler */
229 : : #ifdef HAVE_TYPEOF
230 : : #define copyObject(obj) ((typeof(obj)) copyObjectImpl(obj))
231 : : #else
232 : : #define copyObject(obj) copyObjectImpl(obj)
233 : : #endif
234 : :
235 : : /*
236 : : * nodes/equalfuncs.c
237 : : */
238 : : extern bool equal(const void *a, const void *b);
239 : :
240 : : #endif /* !FRONTEND */
241 : :
242 : :
243 : : /*
244 : : * Typedef for parse location. This is just an int, but this way
245 : : * gen_node_support.pl knows which fields should get special treatment for
246 : : * location values.
247 : : *
248 : : * -1 is used for unknown.
249 : : */
250 : : typedef int ParseLoc;
251 : :
252 : : /*
253 : : * Typedefs for identifying qualifier selectivities, plan costs, and row
254 : : * counts as such. These are just plain "double"s, but declaring a variable
255 : : * as Selectivity, Cost, or Cardinality makes the intent more obvious.
256 : : *
257 : : * These could have gone into plannodes.h or some such, but many files
258 : : * depend on them...
259 : : */
260 : : typedef double Selectivity; /* fraction of tuples a qualifier will pass */
261 : : typedef double Cost; /* execution cost (in page-access units) */
262 : : typedef double Cardinality; /* (estimated) number of rows or other integer
263 : : * count */
264 : :
265 : :
266 : : /*
267 : : * CmdType -
268 : : * enums for type of operation represented by a Query or PlannedStmt
269 : : *
270 : : * This is needed in both parsenodes.h and plannodes.h, so put it here...
271 : : */
272 : : typedef enum CmdType
273 : : {
274 : : CMD_UNKNOWN,
275 : : CMD_SELECT, /* select stmt */
276 : : CMD_UPDATE, /* update stmt */
277 : : CMD_INSERT, /* insert stmt */
278 : : CMD_DELETE, /* delete stmt */
279 : : CMD_MERGE, /* merge stmt */
280 : : CMD_UTILITY, /* cmds like create, destroy, copy, vacuum,
281 : : * etc. */
282 : : CMD_NOTHING, /* dummy command for instead nothing rules
283 : : * with qual */
284 : : } CmdType;
285 : :
286 : :
287 : : /*
288 : : * JoinType -
289 : : * enums for types of relation joins
290 : : *
291 : : * JoinType determines the exact semantics of joining two relations using
292 : : * a matching qualification. For example, it tells what to do with a tuple
293 : : * that has no match in the other relation.
294 : : *
295 : : * This is needed in both parsenodes.h and plannodes.h, so put it here...
296 : : */
297 : : typedef enum JoinType
298 : : {
299 : : /*
300 : : * The canonical kinds of joins according to the SQL JOIN syntax. Only
301 : : * these codes can appear in parser output (e.g., JoinExpr nodes).
302 : : */
303 : : JOIN_INNER, /* matching tuple pairs only */
304 : : JOIN_LEFT, /* pairs + unmatched LHS tuples */
305 : : JOIN_FULL, /* pairs + unmatched LHS + unmatched RHS */
306 : : JOIN_RIGHT, /* pairs + unmatched RHS tuples */
307 : :
308 : : /*
309 : : * Semijoins and anti-semijoins (as defined in relational theory) do not
310 : : * appear in the SQL JOIN syntax, but there are standard idioms for
311 : : * representing them (e.g., using EXISTS). The planner recognizes these
312 : : * cases and converts them to joins. So the planner and executor must
313 : : * support these codes. NOTE: in JOIN_SEMI output, it is unspecified
314 : : * which matching RHS row is joined to. In JOIN_ANTI output, the row is
315 : : * guaranteed to be null-extended.
316 : : */
317 : : JOIN_SEMI, /* 1 copy of each LHS row that has match(es) */
318 : : JOIN_ANTI, /* 1 copy of each LHS row that has no match */
319 : : JOIN_RIGHT_SEMI, /* 1 copy of each RHS row that has match(es) */
320 : : JOIN_RIGHT_ANTI, /* 1 copy of each RHS row that has no match */
321 : :
322 : : /*
323 : : * These codes are used internally in the planner, but are not supported
324 : : * by the executor (nor, indeed, by most of the planner).
325 : : */
326 : : JOIN_UNIQUE_OUTER, /* LHS has be made unique */
327 : : JOIN_UNIQUE_INNER, /* RHS has be made unique */
328 : :
329 : : /*
330 : : * We might need additional join types someday.
331 : : */
332 : : } JoinType;
333 : :
334 : : /*
335 : : * OUTER joins are those for which pushed-down quals must behave differently
336 : : * from the join's own quals. This is in fact everything except INNER, SEMI
337 : : * and RIGHT_SEMI joins. However, this macro must also exclude the
338 : : * JOIN_UNIQUE symbols since those are temporary proxies for what will
339 : : * eventually be an INNER join.
340 : : *
341 : : * Note: semijoins are a hybrid case, but we choose to treat them as not
342 : : * being outer joins. This is okay principally because the SQL syntax makes
343 : : * it impossible to have a pushed-down qual that refers to the inner relation
344 : : * of a semijoin; so there is no strong need to distinguish join quals from
345 : : * pushed-down quals. This is convenient because for almost all purposes,
346 : : * quals attached to a semijoin can be treated the same as innerjoin quals.
347 : : */
348 : : #define IS_OUTER_JOIN(jointype) \
349 : : (((1 << (jointype)) & \
350 : : ((1 << JOIN_LEFT) | \
351 : : (1 << JOIN_FULL) | \
352 : : (1 << JOIN_RIGHT) | \
353 : : (1 << JOIN_ANTI) | \
354 : : (1 << JOIN_RIGHT_ANTI))) != 0)
355 : :
356 : : /*
357 : : * AggStrategy -
358 : : * overall execution strategies for Agg plan nodes
359 : : *
360 : : * This is needed in both pathnodes.h and plannodes.h, so put it here...
361 : : */
362 : : typedef enum AggStrategy
363 : : {
364 : : AGG_PLAIN, /* simple agg across all input rows */
365 : : AGG_SORTED, /* grouped agg, input must be sorted */
366 : : AGG_HASHED, /* grouped agg, use internal hashtable */
367 : : AGG_MIXED, /* grouped agg, hash and sort both used */
368 : : } AggStrategy;
369 : :
370 : : /*
371 : : * AggSplit -
372 : : * splitting (partial aggregation) modes for Agg plan nodes
373 : : *
374 : : * This is needed in both pathnodes.h and plannodes.h, so put it here...
375 : : */
376 : :
377 : : /* Primitive options supported by nodeAgg.c: */
378 : : #define AGGSPLITOP_COMBINE 0x01 /* substitute combinefn for transfn */
379 : : #define AGGSPLITOP_SKIPFINAL 0x02 /* skip finalfn, return state as-is */
380 : : #define AGGSPLITOP_SERIALIZE 0x04 /* apply serialfn to output */
381 : : #define AGGSPLITOP_DESERIALIZE 0x08 /* apply deserialfn to input */
382 : :
383 : : /* Supported operating modes (i.e., useful combinations of these options): */
384 : : typedef enum AggSplit
385 : : {
386 : : /* Basic, non-split aggregation: */
387 : : AGGSPLIT_SIMPLE = 0,
388 : : /* Initial phase of partial aggregation, with serialization: */
389 : : AGGSPLIT_INITIAL_SERIAL = AGGSPLITOP_SKIPFINAL | AGGSPLITOP_SERIALIZE,
390 : : /* Final phase of partial aggregation, with deserialization: */
391 : : AGGSPLIT_FINAL_DESERIAL = AGGSPLITOP_COMBINE | AGGSPLITOP_DESERIALIZE,
392 : : } AggSplit;
393 : :
394 : : /* Test whether an AggSplit value selects each primitive option: */
395 : : #define DO_AGGSPLIT_COMBINE(as) (((as) & AGGSPLITOP_COMBINE) != 0)
396 : : #define DO_AGGSPLIT_SKIPFINAL(as) (((as) & AGGSPLITOP_SKIPFINAL) != 0)
397 : : #define DO_AGGSPLIT_SERIALIZE(as) (((as) & AGGSPLITOP_SERIALIZE) != 0)
398 : : #define DO_AGGSPLIT_DESERIALIZE(as) (((as) & AGGSPLITOP_DESERIALIZE) != 0)
399 : :
400 : : /*
401 : : * SetOpCmd and SetOpStrategy -
402 : : * overall semantics and execution strategies for SetOp plan nodes
403 : : *
404 : : * This is needed in both pathnodes.h and plannodes.h, so put it here...
405 : : */
406 : : typedef enum SetOpCmd
407 : : {
408 : : SETOPCMD_INTERSECT,
409 : : SETOPCMD_INTERSECT_ALL,
410 : : SETOPCMD_EXCEPT,
411 : : SETOPCMD_EXCEPT_ALL,
412 : : } SetOpCmd;
413 : :
414 : : typedef enum SetOpStrategy
415 : : {
416 : : SETOP_SORTED, /* input must be sorted */
417 : : SETOP_HASHED, /* use internal hashtable */
418 : : } SetOpStrategy;
419 : :
420 : : /*
421 : : * OnConflictAction -
422 : : * "ON CONFLICT" clause type of query
423 : : *
424 : : * This is needed in both parsenodes.h and plannodes.h, so put it here...
425 : : */
426 : : typedef enum OnConflictAction
427 : : {
428 : : ONCONFLICT_NONE, /* No "ON CONFLICT" clause */
429 : : ONCONFLICT_NOTHING, /* ON CONFLICT ... DO NOTHING */
430 : : ONCONFLICT_UPDATE, /* ON CONFLICT ... DO UPDATE */
431 : : } OnConflictAction;
432 : :
433 : : /*
434 : : * LimitOption -
435 : : * LIMIT option of query
436 : : *
437 : : * This is needed in both parsenodes.h and plannodes.h, so put it here...
438 : : */
439 : : typedef enum LimitOption
440 : : {
441 : : LIMIT_OPTION_COUNT, /* FETCH FIRST... ONLY */
442 : : LIMIT_OPTION_WITH_TIES, /* FETCH FIRST... WITH TIES */
443 : : } LimitOption;
444 : :
445 : : #endif /* NODES_H */
|
